Vintage Windmill and Wind Generator Forum

here is a parts list for a Hambone. If it's too small let me know. You should be able to blow it up I think.


Here is a Dempster pullout tube. very similar to a Hambone one. Measurements are different though.

the chain hooks to the tail hook, and the other end goes around the pulleys down the neckpipe. Inside there, it hooks to a pullout tube. That tube has a lower end on it like a great big nail, only hollow. A fork goes around that to be able to pull it down from the g round to turn the mill off. So, y...

do you wear leggings when you go out in the field to work?

Thanks Paul. Notice my initials on the back of all the 6 footers. LOL

Have a great day!

Not sure about that. If the lever is mounted on the inside of the tower leg, it should automatically go over -center when you pull down. We usually put a wire ring around the leg to slide up over the handle anyway to hold it.

For 6 or 8 ft mills, I usually make them 2 ft or so. Give or take.

We have pulled them before using the crosshead tie IF, IF the setscrews are tight, and they are threaded into the case properly. However, we usually pull the tail open and strap it to the outer band of the wheel, (by an arm) and go around under the pulleys in the back, and under the snout in the fro...

I think it's another one of those dastardly things the human race has to endure. These things pop up all the time it seems. I get a flu shot every year. Not the covid shot though. Will wait for a while and when they get it right, maybe I will. I did get other shots this year, one for pneumonia, one ...

Don't worry about it. The mistakes I've made makes yours look like a raging success.