Monitor L pullout

......when you need to get in the weeds.
Post Reply
windmillerman
Posts: 141
Joined: Sat Dec 15, 2018 9:40 am

Monitor L pullout

Post by windmillerman »

Anyone have a picture of a football monitor pullout mechanism? Figure it is a chain/pipe with ring on bottom to fit strap pull/ slip paw on strap iron............?
User avatar
pcowley (RIP)
Posts: 137
Joined: Sun Dec 30, 2018 2:45 pm
Location: Ropesville, Texas
Contact:

Re: Monitor L pullout

Post by pcowley (RIP) »

The projection that you see in the pic (#18) on the flat bar is a horseshoe like piece that fits over the washer on the bottom of the pull out tube.The horseshoe is the swivel for the pull out wire. The bottom of the flat bar goes through a slot in the storm stay.The hook on the chain hooks into the brake pull out on the main frame.I will look tomorrow to see if I have one I can take some pictures of.
From Clipboard.jpg
pull out tube.jpg
You do not have the required permissions to view the files attached to this post.
That's my story and I'm sticking to it.
Paul Cowley phone 806dash562dash4418
Terry
Posts: 222
Joined: Thu Dec 27, 2018 8:32 pm
Location: Moundridge Ks.

Re: Monitor L pullout

Post by Terry »

Monitor pullout L.jpg
# 1 chain attaches going up to the top end around the pulley on the head and hooks to #12 on the parts list outer sleeve bottom half.
# 2 fits into # 3 with that being the swivel. # 3 also goes through K 19 swivel slide guide.
# 4 goes through the slot in # 5. # 4 is where the pullout wire is attached to.
# 5 is the turn table.
I will send a parts list to Paul to put in the library.
Terry
You do not have the required permissions to view the files attached to this post.
User avatar
pcowley (RIP)
Posts: 137
Joined: Sun Dec 30, 2018 2:45 pm
Location: Ropesville, Texas
Contact:

Re: Monitor L pullout

Post by pcowley (RIP) »

Good explanation. It's all fairly easy to make except for #3. I still haven't figured that one out.
That's my story and I'm sticking to it.
Paul Cowley phone 806dash562dash4418
Wayne
Posts: 2115
Joined: Mon Dec 17, 2018 10:03 am
Location: Corsicana Tx.

Re: Monitor L pullout

Post by Wayne »

IMG_20191111_094014920.jpg
IMG_20191111_094030151.jpg
Here are a couple installed in the mill!
You do not have the required permissions to view the files attached to this post.
User avatar
windybob
Posts: 3503
Joined: Mon Jan 14, 2019 5:59 pm
Location: Ames Oklahoma

Re: Monitor L pullout

Post by windybob »

So i guess an L is a pullOUT mill rather than a pullIN mill. That setup is just like the Hambone mills.
Call Dan Benjamin for parts. P M me for the phone number.
windmillerman
Posts: 141
Joined: Sat Dec 15, 2018 9:40 am

Re: Monitor L pullout

Post by windmillerman »

thanks guys, I found what I had built for such many moons ago
Post Reply