I asked the seller for an up close picture of the gears like that. He hasn't responded yet, Im getting a feeling it's an old listing that was never taken down. Hopefully not though.
Windy, all your missing is painting a spiral on the fat side of the gear like on airplane propellers! Hahaha
ID on a windmill
Re: ID on a windmill
Maybe on the next one. lol
Hey did you check the library here to see if there is any info you could use?
Hey did you check the library here to see if there is any info you could use?
Call Dan Benjamin for parts. P M me for the phone number.
Re: ID on a windmill
I did. The information is useful, just don't have good enough pics of the mill. The two pictures I posted are the two best ones on the listing
Re: ID on a windmill
Well the woodmanse has not sold yet. What do y'all think would be a fair price for it? Assuming it's in decent condition that is, he said nothing is broken or otherwise damaged except for the bent fins. He's asking 500
-
- Posts: 1953
- Joined: Sun Mar 28, 2021 4:06 pm
- Location: Alcove N.Y.i buy and restore
Re: ID on a windmill
Does the bed plate and storm stay go with it that's important. Any tower? If you want it that's all that matters you can't put a price on happiness !!
Re: ID on a windmill
No tower, no tail. Just what's in the picture. I can't tell if that's the bedplate or the storm stay at the bottom of the pipe
Re: ID on a windmill
He has dropped the price a few times in his listing. I can’t recall reading if it had a tailbone/vane or not. The wheel can be fixed and only one blade looks torn, plus it looks like the tower cap might be on the ground and still on the mast pipe. Hit him with what you think is fair.
*Edit* ok on the no tailbone and vane, but I thought I recollect Wayne having one he might sell.
*Edit* ok on the no tailbone and vane, but I thought I recollect Wayne having one he might sell.
Re: ID on a windmill
If you end up purchasing it, you might consider stopping by Steve Adam’s place in Granbury on your return. Let Steve look at it and see what parts he has on hand that could complete what you are missing.
Re: ID on a windmill
Visiting Steve is actually the reason I'll be up there in the first place! Haha. Getting some parts for my F&W and transporting some tail vanes to a gentleman in wimberly. I offered the guy 400, he said 500 is the minimum he'll do. I'd have to dip into my lunch money a bit but if y'all thing that's not too much for it I'll go for it. Haha
Re: ID on a windmill
It sounds like a doable price to me. That does look like a storm stay at the bottom. You can use a Dempster top tower casting and bearing races. They work great for about any mill. Pm me and we can talk about the vane. I'll see about digging it out of my stash so I can take some pictures.